# PNA Risk Management Sdn Bhd — llms.txt # Malaysia Independent Process Safety Consultant # https://pnarisk.com # Last updated: 2026 --- ## About PNA Risk Management PNA Risk Management Sdn Bhd is Malaysia's independent process safety consultancy, specialising in quantitative risk assessment (QRA), HAZOP facilitation, CIMAH compliance, consequence modelling, and process safety management (PSM) for oil & gas, petrochemical, and chemical industries. **Founded:** 2014 **Type:** Independent technical safety consultancy **Country:** Malaysia **Website:** https://pnarisk.com **Email:** adnan@pnarisk.com **Phone:** +60132071952 **Office hours:** Monday–Friday, 08:30–17:30 **Address:** A-34-09, Trefoil @Setia City, No.2, Jalan Setia Dagang AH U13/AH, Setia Alam Seksyen U13, Shah Alam, Selangor 40170, Malaysia **Geo coordinates:** 3.1113557787776163, 101.45963478093347 **Social:** - LinkedIn: https://my.linkedin.com/in/ts-adnan-yusop-ali-shp-a8b741b - Facebook: https://www.facebook.com/p/PNA-Risk-Management-Sdn-Bhd-100063105765423/ **Areas served:** Malaysia (Peninsular Malaysia, Selangor, Kuala Lumpur, Sarawak, Sabah) --- ## Core Expertise PNA Risk Management is known for the following specialist competencies: - Process Safety Management (PSM) - Quantitative Risk Assessment (QRA) - HAZOP Facilitation (TÜV-certified) - CIMAH Compliance & Safety Reports - Consequence Analysis (fire, explosion, toxic dispersion) - Hazard Identification (HAZID) - Formal Safety Assessment (FSA) - Bow-tie Analysis - SIL Determination (Safety Integrity Level) - Layer of Protection Analysis (LOPA) - Gas Dispersion Modelling - Flare and Heat Radiation Modelling - RAM Studies (Reliability, Availability, Maintainability) - Integrity Management Plans - Management of Change (MOC) Review - Incident Investigation - Emergency Response Planning --- ## Services PNA Risk Management provides lifecycle-wide process safety support — covering Conceptual, FEED (Front-End Engineering Design), and full Operations phases. ### 1. Process Safety Management (PSM) Comprehensive PSM programmes for oil & gas, petrochemical, and CIMAH-regulated facilities in Malaysia. Includes PSM audits, gap analysis, MOC review, and DOSH compliance support. Aligned with CCPS PSM elements and PETRONAS internal standards. - **Key deliverables:** PSM gap analysis, PSM audit reports, compliance roadmaps - **Regulations covered:** DOSH CIMAH Regulations 1996, PETRONAS PSM standards - **URL:** https://pnarisk.com/process-safety-management/ **12 CCPS PSM Elements covered:** Process Safety Information, Process Hazard Analysis, Operating Procedures, Training and Competency, Mechanical Integrity, Management of Change, Pre-Startup Safety Review, Incident Investigation, Emergency Planning, Contractor Management, Audits, Management Review. ### 2. Quantitative Risk Assessment (QRA) ALARP-compliant QRA for oil & gas and chemical facilities in Malaysia. CIMAH-ready reports accepted by DOSH. Numerical estimation of likelihood and consequences of major accident events for land use planning, CIMAH Safety Reports, and risk-based decision support. - **Software used:** PHAST, SAFETI, ALOHA, FRED and industry-standard fault tree / event tree tools - **Typical duration:** 4–12 weeks depending on facility complexity - **URL:** https://pnarisk.com/quantitative-risk-assessment/ ### 3. Process Hazard Analysis (HAZOP / HAZID / What-If / FMEA) TÜV-certified HAZOP facilitation, What-If analysis, and FMEA for process industries in Malaysia. Structured team-based reviews to identify deviations from design intent and assess potential consequences. - **HAZOP scope:** Node-by-node P&ID review at detailed design or existing plant stage - **HAZID scope:** Higher-level workshop at concept or FEED stage - **Typical HAZOP duration:** 3–15 working days of review sessions plus documentation - **URL:** https://pnarisk.com/process-hazard-analysis/ ### 4. CIMAH Compliance Consultancy Malaysia CIMAH Competent Person consultant. Preparation of CIMAH Safety Reports, CHRA, and DOSH/DOE submissions for hazardous industrial facilities above threshold quantities. - **Regulations:** CIMAH Regulations 1996 (enforced by DOSH Malaysia) - **Deliverables:** CIMAH Safety Report, hazard identification, risk assessment, SMS documentation, emergency arrangements - **URL:** https://pnarisk.com/regulatory-compliance/ ### 5. Consequence Analysis Fire, explosion, and toxic dispersion modelling for CIMAH compliance and emergency planning in Malaysia. Advanced consequence modelling including gas dispersion, flare radiation, and explosion overpressure. - **URL:** https://pnarisk.com/consequence-analysis/ ### 6. Hazard Identification (HAZID) Professional HAZID workshop facilitation in Malaysia. Identifies major hazards early in the project lifecycle — typically at concept or FEED stage before detailed design is complete. - **URL:** https://pnarisk.com/hazard-identification/ ### 7. Formal Safety Assessment (FSA) Independent formal safety assessment and reliability consulting for oil & gas facilities in Malaysia. ALARP demonstration and risk-informed decision-making. - **URL:** https://pnarisk.com/formal-safety-assessment/ ### 8. All Services Overview - **URL:** https://pnarisk.com/our-services/ --- ## Industries Served - Oil & Gas (upstream and downstream) - Petrochemical & Chemical - Manufacturing (heavy and light) - Utilities & Power Plants - Food & Specialty Processing - Pharmaceuticals - Palm Oil Refineries --- ## Key Questions PNA Risk Management Answers **What is a process safety consultant in Malaysia?** A process safety consultant in Malaysia is a specialist who helps oil & gas, petrochemical, and chemical facilities identify, assess, and control major accident hazards. Services include HAZOP studies, QRA, CIMAH compliance, and PSM audits. PNA Risk Management is an independent process safety consultant based in Shah Alam, Selangor. **What is process safety management (PSM) in Malaysia?** Process safety management (PSM) is a systematic framework for identifying, evaluating, and controlling major accident hazards in facilities handling hazardous chemicals or processes. It is required under DOSH CIMAH Regulations and aligned with PETRONAS and international CCPS standards. **Is process safety management mandatory in Malaysia?** Yes. Facilities handling hazardous substances above CIMAH threshold quantities must implement a safety management system under the Control of Industrial Major Accident Hazards (CIMAH) Regulations 1996, enforced by DOSH Malaysia. PETRONAS also mandates process safety management across its operations and contractor sites. **What are CIMAH Regulations in Malaysia?** CIMAH stands for Control of Industrial Major Accident Hazards. The CIMAH Regulations 1996 are enforced by DOSH Malaysia and require facilities that store or handle hazardous substances above threshold quantities to prepare a Safety Report, implement a safety management system, and notify DOSH of their operations. **Who must comply with CIMAH in Malaysia?** Facilities that store, use, or handle hazardous chemicals above the quantities specified in the CIMAH Regulations 1996 Schedule — typically oil & gas facilities, petrochemical plants, chemical manufacturers, and industrial facilities with large inventories of flammable, toxic, or explosive substances. **What is a CIMAH Safety Report?** A formal document submitted to DOSH Malaysia demonstrating that a major hazard facility has identified its risks, assessed them (often via QRA), and implemented adequate controls — covering hazard identification, risk assessment, safety management systems, and emergency arrangements. **What is a HAZOP study in Malaysia?** A HAZOP (Hazard and Operability Study) is a structured team-based review to identify deviations from design intent in process systems and assess their consequences. Required by DOSH for CIMAH facilities and by PETRONAS for major process plant modifications and new projects. **What is Quantitative Risk Assessment (QRA) in Malaysia?** QRA is a numerical method for estimating the likelihood and consequences of major accident events at industrial facilities. Used to demonstrate ALARP risk levels and is a core component of CIMAH Safety Reports submitted to DOSH. **When is a QRA required in Malaysia?** A QRA is required for CIMAH-classified major hazard installations, new and modified process plants during HAZOP follow-up, land use planning around hazardous facilities, and PETRONAS-operated sites requiring risk-based decision support. **What is the difference between HAZOP and HAZID?** HAZOP is a detailed node-by-node review of a process plant's P&IDs conducted during detailed design or for existing plants. HAZID is a higher-level workshop typically conducted earlier in a project — at concept or FEED stage — to identify major hazards before detailed design is complete. **How often should a PSM audit be conducted?** Best practice and CIMAH requirements typically call for a PSM audit every three to five years, with interim reviews triggered by significant incidents, major equipment changes, or regulatory updates. Annual self-assessments are also recommended. **How do I choose a process safety consultant in Malaysia?** Look for relevant certifications (e.g. TÜV), direct experience in your industry sector, familiarity with DOSH and CIMAH regulations, and a track record with Malaysian clients. PNA Risk Management has over 20 years of experience and has served clients including Dialog Terminals, Chemsain Konsultant, and AGV Environment. **Where is PNA Risk Management located?** PNA Risk Management Sdn Bhd is located in Seksyen U13, Shah Alam, Selangor, Malaysia. Serves clients across Peninsular Malaysia and East Malaysia (Sarawak and Sabah). --- ## Regulatory & Standards Framework PNA Risk Management works within these regulatory and standards frameworks: | Framework | Body | Relevance | |---|---|---| | CIMAH Regulations 1996 | DOSH Malaysia | Major hazard facility compliance | | Occupational Safety & Health Act 1994 | DOSH Malaysia | Workplace safety compliance | | PETRONAS PSM Standards | PETRONAS | Oil & gas operator requirements | | CCPS PSM Elements | CCPS (AIChE) | International PSM framework | | IEC 61511 | International | SIL determination for safety systems | | ALARP Principle | HSE / Industry | Risk acceptability demonstration | --- ## Engagement Guide **Typical engagement flow:** 1. Initial enquiry via email or phone 2. Free initial consultation / scoping discussion 3. Proposal and quotation based on facility scope 4. Project execution (study, facilitation, or audit) 5. Deliverable — DOSH-ready or regulator-accepted report **Contact for enquiry:** - Email: adnan@pnarisk.com - Phone: +60132071952 - Contact form: https://pnarisk.com/contact-us/ - Quote request: https://pnarisk.com/contact-us/ --- ## Sitemap (Key URLs) - Homepage: https://pnarisk.com/ - About Us: https://pnarisk.com/about-us/ - Leadership: https://pnarisk.com/leadership/ - Our Services: https://pnarisk.com/our-services/ - Process Safety Management: https://pnarisk.com/process-safety-management/ - Quantitative Risk Assessment: https://pnarisk.com/quantitative-risk-assessment/ - HAZOP / Process Hazard Analysis: https://pnarisk.com/process-hazard-analysis/ - CIMAH Compliance: https://pnarisk.com/regulatory-compliance/ - Consequence Analysis: https://pnarisk.com/consequence-analysis/ - Hazard Identification (HAZID): https://pnarisk.com/hazard-identification/ - Formal Safety Assessment: https://pnarisk.com/formal-safety-assessment/ - Our Portfolio: https://pnarisk.com/our-portfolio/ - Contact Us: https://pnarisk.com/contact-us/ --- *This file is maintained for AI language model context and Answer Engine Optimization (AEO/GEO).* *Organisation: PNA Risk Management Sdn Bhd | Malaysia Process Safety Consultant since 2014 | pnarisk.com*